Characteristics and Scope of Use of Organic Grinding Tools

Release time：

2024-06-25

Characteristics and Scope of Use of Organic Grinding Tools

The characteristics of organic grinding tools are wide range of use, certain elasticity, high bonding strength, and good polishing performance. It is applied in grinding processes such as coarse, fine, fine, and polishing. Its resin grinding tool has the following characteristics: high bonding strength. Compared with ceramic bonding agents, resin bonding agents have high bonding strength. The resin grinding wheel can achieve a grinding speed of 80-120m/s and can withstand large grinding pressures.

The heavy load grinding wheel has a grinding pressure of up to 10 × 104-40 × 104N and is widely used in the steel industry, such as various steel ingots, billets, and other rough grinding processes. High speed heavy-duty specialized grinding wheels and other rough grinding processes have operational safety, are suitable for high-speed grinding and high feed grinding, and have high grinding efficiency. It has a certain degree of elasticity and good toughness compared to ceramic grinding tools and resin grinding tools, with a certain degree of plasticity and ductility. Its elastic modulus (E) is several tens of times lower than that of ceramics. Therefore, resin grinding tools are suitable for preparing various specifications of thin disc grinding wheels and high-speed cutting grinding wheels. At the same time, due to certain elastic deformation, it can buffer the effect of grinding force. Therefore, the grinding effect is good, with a polishing effect, which can improve the roughness of the processed surface.

Abrasive grinding tools are a collective term for abrasives and grinding tools, including abrasive products and grinding tool products. Abrasive tools are known as industrial teeth. During grinding,

Abrasive tools are known as industrial teeth

Ordinary abrasive bonded grinding tools are grinding tools that use binders to solidify ordinary abrasives into a certain shape and have a certain strength. Generally composed of abrasives, binders, and pores, these three parts are often referred to as the three elements of bonded abrasives.

Introduction to the Strength and Reprocessability of Grinding Tools

The hardness of the grinding tool mainly depends on the amount of binder added and the density of the grinding tool. If the abrasive particles are easy to fall off, it indicates that the hardness of the grinding tool is low; On the contrary, it indicates high hardness.

Classification of hardness levels for grinding tools

A rotary high-temperature calcination kiln for abrasive coating with uniform heating drum belongs to the field of mechanical equipment. Provide a rotary high-temperature calcination kiln for abrasive coating with a uniform heating drum, characterized in that:

Widely used abrasives

Contact person: Mr. Lin
Mobile: +86 18806337266
Phone: +86-633-8309362
E-mail: sdybdmlmj@163.com
Address: No. 2 Liuzhou Road, Economic Development Zone, Rizhao City, Shandong Province

WeChat

Business License

Phone

+86-633-8309362

E-mail

sdybdmlmj@163.com

8618806337266